High Solid Content Cationic Polyacrylamide Powder Flocculant with 8-12 Million Molecular Weight and 10%-70% Cationic Degree for Water Treatment

Power Plant Water Treatment Chemical Flocculant Cationic Polyacrylamide Powder is a high-performance water treatment solution designed for industrial applications.

• Use clean tap water or softened water for dissolution, with water temperature controlled at 20-40°C (avoid high temperatures causing molecular chain degradation)
• Stir at a moderate speed (60-200 rpm) for 60-90 minutes to ensure complete dissolution and prevent agglomeration

• Adjust the dosage according to water quality characteristics (e.g., suspended solid concentration, charge properties), and it is recommended to determine the optimal dosage through beaker tests
• When used in combination with inorganic flocculants, add PAC and other inorganic agents first, then add CPAM (with a 1-2 minute interval) to avoid reagent interaction and failure

• Store in a dry, ventilated warehouse, avoiding moisture and direct sunlight, with a shelf life of typically 2 years
• Wear gloves and protective goggles during operation. If the powder comes into contact with skin or eyes, rinse immediately with water

• Cationic Degree: 10%-70% (selected based on the concentration of negatively charged particles in water; high-cationic-degree products are suitable for high-turbidity wastewater)
• Molecular Weight: 8-12 million (high-molecular-weight products have strong bridging ability, suitable for sludge dewatering; medium-low molecular weight products are suitable for wastewater pretreatment)
• Dissolution Time: ≤90 minutes (use after complete dissolution; undissolved particles will block the dosing pipeline)

Our factory Jiangsu Hengfeng Polymer, as a leading 25-years history of water treatment polyacrylamide factory, is dedicated to providing high-quality water treatment solutions. Our expertise in producing polyacrylamide ensures that our clients receive the most effective and reliable products for their water treatment needs.

Polyacrylamide has excellent flocculation properties in water treatment. It helps separate solid and liquid phases quickly in water and accelerates the sedimentation of solids. The quality of water improves significantly after polyacrylamide treatment.

For wastewater treatment, Polyacrylamide works effectively with polyaluminum chloride (PAC). The combination can remove various contaminants from wastewater including chromacity, turbidity, oils, metal ions, fluoride, phosphate, and more. Additionally, using polyacrylamide in combination with PAC can significantly reduce the required dosage.